ASUS (华硕) DSBF-D12/SAS BIOS免费下载(ver. 1005)

BIOS for ASUS DSBF-D12/­SAS DSBF-D12/­SAS BIOS Version 1005 1.­ Fixes CPU Speed was wrong under BIOS setup menu and POST screen.­ The speed showed "3.­10GHz",­ but it should be 3.­16GHz.­ 2.­ Fixed the problem that PCI-E VGA card does not work when memory is great than 3.­5G with Dempsey processor.­ 3.­ Fixed the problem that when using Harpertown processor,­ no matter TM2 is disable or enable the MSR 1A0h bit 13 has no difference.­ 4.­ Fixed the problem that DMI Table Type 04 information is not correct while mixed stepping with G0 in CPU1.­ 5.­ Fixed DEMPSEY CPU information display issue in SETUP.­ 6.­ Fix when Intel Xeon X5355 2.­66GHz/­Stepping G0 in CPU1 + Intel Xeon X5355 2.­66GHz/­Stepping B3 in CPU2 check DMI Table Type 04 - Processor Information,­ The information shown will be incorrect.­ 7.­ Fix IF Intel Xeon X5355 2.­66GHz/­Stepping B3 in CPU1 + Intel Xeon X5355 2.­66GHz/­Stepping G0 in CPU2 check DMI Table Type 04 - Processor Information,­ The Information shown will be incorrect.­ 8.­ Select "Discard Changes" in BIOS Exit panel,­ it will change Boot Priority as Load Setup Default.­ 9.­ Fix When using LSI ZCR SAS card with RAID enable,­ the Floppy will dispear.­ 10.­ Reduce the time spent on the extended memory test when user wish to skip the memory test above 4G.­ 11.­ Fixes first boot with no HDD install.­shutdown and attached SATA HDD then boot again.­ 12.­ Fixes when PS/­2 MouseSupport set Disabled,­ System boot into Windows Server 2003,­ both of mouse and keybaord can't work.­ 13.­ Fixes ASMB2_­ASMB3-SOL Bug#: When plugged ASMB3-SOL card on system,­ BIOS Hardware Monitor was abnormal sometimes.­ But it showed normally in ARC.­ 14.­ Fixes ASMB2_­ASMB3-SOL Bug#: When Client connected to Server then enter to BIOS setup menu,­ press function key like "F1",­"F5" etc.­.­ The pop panel was blinking.­ This issue happened in Hyper Terminal &­ Linux OpenIPMI(Text mode).­ But this issue didn't happen in ARC and Linux OpenIPMI(X-Window).­ 15.­ Fixes ASMB2_­ASMB3-SOL Bug#:If pressing "pause" to stop booting when server BIOS POST,­ we can't make it to continue booting by remote console.­ 16.­ Remove "Setup Menu"->"Server"->"Console Redirection"->"Console Connection" item 17.­ Change default value of "Setup Menu"->"Advancded"->"Intel EIST support" to be disable.­